Auto Hand Washing Implementation Based Microcontroller Using Independent Power Source
Implementasi Pencuci Tangan Otomatis Berbasis Mikrokontroler dengan Sumber Energi Mandiri
Keywords:
Covid19, Auto hand washer, MicrocontrollerAbstract
The world is facing the beginning of the covid 19 pandemic. Corona Virus Disease (Covid 19) is a disease caused by a new type of virus called SARS-CoV-2. The government's concern about the increasing impact of the virus requires preventive action to be taken by implementing various health protocols, one of which is washing hands. Washing hands with conventional equipment still allows contamination of viruses and bacteria while touching of a water valve or soap pump lever. For this reason, a hand washing system is designed to automatically function without any touch. The control system uses ATMega328 microcontroller, distance sensor, motor driver and DC water pump. The system also designed for areas where electricity is not fully covered, with built in a solar power plant. The results of manufacture and testing show that the system works as well. With a water storage capacity of 19 liters, the hand washing process can be carried out 14 times. Measurements of the PLTS system show that the system can operate for approximately 3 hours with a battery charging time of 3.5 hours.
Downloads
References
Andry Fitrian & Iman Noor. (2021). Pengembangan Alat Cuci Tangan Otomatis Berbasis Sensor Gerak Arduino (PIR) di UKM Hanggar Karya Manufaktur. Prosiding Seminar Nasional Sains, 2(1), 590–595.
Asrul, A., Sahidin, S., & Alam, S. (2021). Mesin Cuci Tangan Otomatis Menggunakan Sensor Proximity dan DFPlayer Mini Berbasis Arduino Uno. Jurnal Mosfet, 1(1), 1–7. https://doi.org/10.31850/jmosfet.v1i1.633
Basri, M., & Hamzah, D. (2021). Perancangan Dan Pembuatan Alat Cuci Tangan Otomatis Terhubung Pada Aplikasi Telegram Dalam Rangka Pencegahan Penularan Covid-19 Di Lingkungan Kementerian Sosial Menggunakan Raspberry Pi 3. Tekinfo: Jurnal Bidang Teknik Industri dan Teknik Informatika, 22(1), 131–141. https://doi.org/10.37817/tekinfo.v22i1.1192
Dewi, D. C., Setyani, J., & Yulyanti, S. (2021). Cara Pencegahan Penyebaran Covid-19. Proceeding Secretari Universitas Pamulang, 1(1), 111–116.
Gusa, R. F., Naruari, D., & Yandi, W. (2021). Penerapan Alat Cuci Tangan Otomatis untuk Masyarakat Kelurahan Bukit Merapin Kota Pangkalpinang. Abimanyu: Journal of Community Engagement, 2(1), 54–59. https://doi.org/10.26740/abi.v2i1.11903
Pakpahan, A., & Sirait, R. (2021). Pencuci Tangan Otomatis Berbasis Arduino Uno Menggunakan Sensor Inframerah. ATDS SAINTECH - Journal of Engineering, 2(2), 22–28.
Saputra, T. H., Pamasaria, H. A., Wiratmoko, B., Hermawan, R., & Supriyono, R. (2020). Rancang Bangun Mesin Cuci Tangan Otomatis Portabel Untuk Mengurangi Efek Pandemi Covid 19. 4.
Sukri, H. (2019). Perancangan Mesin Cuci Tangan Otomatis dan Higienis Berbasis Kamera. Rekayasa, 12(2), 163–167. https://doi.org/10.21107/rekayasa.v12i2.5540
Suraidi, S., & Wulandari, M. (2021). Perancangan Sistem Pencuci Tangan Otomatis Tanpa Sentuh Untuk Mencegah Penularan Virus Covid-19. TESLA: Jurnal Teknik Elektro, 23(1), 24. https://doi.org/10.24912/tesla.v23i1.11918
Zulfikar, I., Yuliana, L., & Setyawaty, N. F. (2022). Pencegahan Dan Penanggulangan Covid-19 Di Tempat Kerja. Jurnal Pengabdian Masyarakat EUNOIA, 1(1), 20–26.
